I have connected my 12v/25A aviation plug to a fuse block. I tested the wiring set up on my kitchen table as proof of concept. My composting toilet has an exhaust fan which worked fine off the fuse block.
I installed the fuse block in my RV/van and wired my Maxxfan exhaust to the fuse block. I connected the 12v/25A aviation plug, powered up the AC200(P), turned the DC power on and turned on the fan. The fan did not work. I used my circuit tester to verify that the fuse block had no power.
I have a spare XT60 pig tail which I connected to the 12v/25A aviation plug. My circuit tester verified that there was no output from the 12v/25A aviation plug.
I have verified that some of the other DC output ports are working fine.
I checked the fault history and there were no events.
Is it possible to reset this port? Does anyone have a suggestion of how to test the 12v/25A aviation plug with out buying another or having another AC200(P)?
Thanks in advance for any advice.