Your four 180 watt panels will work fine.
They must be connected in series and not with parallel combiners. The AC200 series requires a minimum of 35 volts for charging to begin and to achieve the 35 volts, two or more panels are required to be connected in series to get above 35 volts. If you connect them with parallel combiners your voltage will be around the 19 to 20 volt range and charging will not be possible.
If you are certain you are connected in series configuration, make sure under the settings you have PV selected and not “Car”. If car is selected, no charging will occur with the solar panels.
Lastly, you do not have 6 pages of faults, you have 6 pages of the fault code definitions. Those are just showing you the possible fault codes and if you have an actual fault, it will be illuminated at the side,