I recently received my new Bluetti AC200P and two 190 Watt HQST solar panels.
Since the HQSTsolar panels only produce 24.3 Voc each I connected them in series.
I connected the two panels to the Mc4 solar charging cable (Mc4 to XT90). Then connected that cable to the supplied XT90 to Aviation plug cable, then into the Bluetti PV input.
Since the Bluetti was fully charged, I plugged in an AC heater and drained the current charge to around 95%.
I then changed the settings to the PV charging option.
The solar panels were not fully in the sun and not directly pointing at the sun, but the 380 total capability of charging should have at least produced 100 watts. However, all it would produce is 2-8 watts. The volts were about 44 and the amps were .1.
The Bluetti AC200P was outside beside the solar panels and it was about 25 degrees outside.
I am very disappointed with the Bluetti charging capability, is there something I am doing wrong?